If the Toccare Multi Loop panel is fitted with the TD571E main pcb, the straight through 9 pin serial lead should be used (see below):
This is also the firmware upgrade lead use for the Toccare MiniOne – all versions. If the Toccare Multi Loop panel has the TD571D main pcb, the correct firmware upgrade connections/ lead is shown below:
The loop cards for the Toccare Multi-loop require the below lead for upgrading the firmware.
Contact Information
For further assistance or if you have any questions regarding this procedure, please contact the Eurotech Technical Team:
Email: [email protected]
Phone: +44 (0) 203 141 0982
Important Notice:
This content is provided for informational purposes only and is intended solely for qualified personnel with appropriate training and expertise. Eurotech Fire Systems Ltd assumes no responsibility for the outcomes resulting from the use of this information. It is the user's responsibility to ensure all work is carried out in accordance with applicable regulations and standards.