Step 1:
Create a new ringing style - Style 2 in this example. Set the phase 2 delay to the required duration that the sounder will ring for -- 1200 secs = 20 minutes in this example.
Select OFF in the output type, this will then ring the sounder for a 20 minutes duration and then turn off.
Step 2:
In the Cause-and-Effect groups select the sounder group 198 (this if the default for sounders). Ensure all wireless sounders are in this group.
Set the ring style 2 -- this will then pull through the 20 minutes duration on all the sounders.
Contact Information
For further assistance or if you have any questions regarding this procedure, please contact the Eurotech Technical Team:
Email: [email protected]
Phone: +44 (0) 203 141 0982
Important Notice:
This content is provided for informational purposes only and is intended solely for qualified personnel with appropriate training and expertise. Eurotech Fire Systems Ltd assumes no responsibility for the outcomes resulting from the use of this information. It is the user's responsibility to ensure all work is carried out in accordance with applicable regulations and standards.