The figure below shows the location of the push-buttons (on the Translator Module) used during the programming process. It also indicates the locatio of the Translator Module LEDs - the use of these LEDs is explained throughout this manual. Detection loop connectivity is also shown:
Contact Information
For further assistance or if you have any questions regarding this procedure, please contact the Eurotech Technical Team:
Email: [email protected]
Phone: +44 (0) 203 141 0982
Important Notice:
This content is provided for informational purposes only and is intended solely for qualified personnel with appropriate training and expertise. Eurotech Fire Systems Ltd assumes no responsibility for the outcomes resulting from the use of this information. It is the user's responsibility to ensure all work is carried out in accordance with applicable regulations and standards.