False Alarm Management:
Select the detector setting to '-' and the other to 'per point'.
Set the investigation delay times in seconds.
Click on the house with the blue cog. Untick the box.
Point details of the I/P (address 4 in this example)
Select the point details as shown.
Ringing Styles:
Make sure the ‘suspend during investigation’ is selected.
Upload the config to the panel – go to level 2 menu to enable the delay.
Contact Information
For further assistance or if you have any questions regarding this procedure, please contact the Eurotech Technical Team:
Email: [email protected]
Phone: +44 (0) 203 141 0982
Important Notice:
This content is provided for informational purposes only and is intended solely for qualified personnel with appropriate training and expertise. Eurotech Fire Systems Ltd assumes no responsibility for the outcomes resulting from the use of this information. It is the user's responsibility to ensure all work is carried out in accordance with applicable regulations and standards.